If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

JET 354165 JDP-15M 3/4 Horsepower 15-Inch Bench Drill Press The Jet Bench Mount Drill Press is a versatile tool with 16 speeds ranging from 200 to 3,630 RPM and powered by a 3/4 HP 115/230 Volt motor. The drill press’s hinged metal belt, pulley cover, and quick-adjustment motor mount allow you to rapidly change the spindle speed. The crank-operated, rotating worktable is able to tilt up to 45 degrees for added versatility, the worktable provides you with a full 10-by-13-inch work surface in front of the drill bit, features X-pattern mounting grooves, and is reversible for mounting a fence in the rear mounting grooves. This drill press has a 15-inch swing, comes with a 5/8-inch drill chuck and key, and has a convenient built-in work-light (bulb not included). Designed with an adjustable tension spindle return spring, this tool also features a quick-set depth stop with convenient display in inches and millimeters. The push-button switch is located on the front of the drill press head for added safety, and the spindle is supported by high-quality ball bearings. The 66-millimeter quill assembly can fit the optional Jet mortising attachment.

What’s in the Box
Bench mount drill press, 5/8-inch drill chuck, and key.
Customer Review: Jet Bench Drill Press
I just received my drill press. The handle that raises the table is too short to reach anything and consequently, the table cannot be raised or lowered unless it is done manually without use of the handle. Did anyone have this problem?

Milwaukee 4270-21 9 Amp Electromagnetic Drill Press Kit For remote drilling in metal, the 4270-21 is a great choice. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2in. diameter holes through 2in. thick steel with annular cutters, or 1/2in. diameter holes 4-1/4in. deep with twist drill bits. The tool is setup to accept standard 3/4in. Weldon shank cutters.
Customer Review: Item as described - Great price !
This unit is compact. And looks like it will last us a long time. Make sure you understand what comes in the case and what does not. The 1/2 Drill chucks had to purchased elsewhere and were not in stock at all locations. So plan ahead and be patient. THis unit is excellent for field repairs and in house repairs that require odd angle drilling.

DELTA DP300L 12-Inch TwinLaser Crosshair Drill Press Delta, Model DP300l, 12″ Laser Crosshairs, Bench Drill Press With A 1/3HP, 120V Motor, Tilting Table, Table Raising Mechanism, 0 To 1/2″ Capacity Chuck & Key, Belt & Pulleys, Light, Tray & Instruction Manual, Fully Adjustable Twin Laser Pod That Projects A Bright Red Crosshair On The Work At The Point Of Bit Contact, Induction Motor For Long-Lasting, Smooth Performance, Pivoting Motor Mount Maintains Correct Belt Tension & Facilitates Speed Changes, Adjustable-Position, Locking Depth Stop For Accurate Depth Measurement & Repetitive Drilling,Tilting Table With Slots For Fast Clamping Of Work.
Customer Review: Not bad, for the price
This is my first drill press and I purchased it for woodworking. As cost is an issue, I swallowed my fears about Black and Decker owning Delta (and selling the same model for more $$$) and bought the DP300L.